WYING C100 GPS HUD OBD2 Display Car Alarm Projector

Car Electronics Accessories Speedometer Projector Auto Gadgets Inteligentes

Product Functions

The brightness can automatically adjust by environment

GPS Version：

It is compatible with all cars! And supports over-speed alarm.

Product working voltage is 5V, and it is forbidden to use a voltage higher than 5V for power supply. Some vehicles voltage are highter than 5V, it doesn’t matter. Our package included a usb cable, you need to plug usb cable in cigarette lighter, and connect it with HUD.

Number of search satellites.

Compass: N (North) E (East) W (West) S (South).

Vehicle speed display,Speed unit: MPH- mile, KM/H- kilometer.

Fatigue Driving Alarm: Fatigue driving alarm is 4 hours, user can freely set this time or turn off this alarm, setting time range: 1-8 hours.

OBD2 Head-up Display

1.Multi function : speed,engine RPM,water temperature,voltage,driving distance.
2.Power switch:5s to turn off,again to turn on.
3.Short Press‘<’:
(1)to switch the display mode  (2) to setup menu options.
Long Press‘<’: Turn off the buzzer and press for 2 seconds to turn on the buzzer again.
4.Fatigue driving , Engine Error.
5.Water temperature icon ,voltage icon.
6.Light sensor:HUD can automatically adjust the brightness according to the environment.
7.MPH=Speed Mile/hour, KM/H=kilometer/hour.
8.Short Press‘>’: Switch speed mode,add menu or parameter after entering setting.
Long Press‘>’: (1)To confirm all of the LED lights can be worked.
(2)To clear engine fault code.
9.Short Press‘M’OBD system: to switch voltage, water temperature,vehicle speed during OBD system, enter into menu setting to switch menu options or parameter values.
Long press‘M’ :to enter into menu settings (see instructions for Menu 1-12) and press 5 seconds to save and exit.

GPS Head-up Display

1.Multi function : speed, satellite number.
2.Power switch: press 5s to turn off, again to turn on.
3.Short Press <: (1) to switch the display mode  (2) to setup menu options
Long Press <:Turn off the buzzer and press for 2 seconds to turn on the buzzer again.
4.Compass: N (North) E (East) W (West) S (South), After the satellite is found, the GPS light stops flashing and stays on for normal use.
5.Light sensor: HUD can automatically adjust the brightness according to the environment.
6.Speed unit: KM/H (kilometers) MPH (miles).
7.Short Press >: Switch speed mode,add menu or parameter after entering setting.
8.Short Press M: to switch car speed and satellite number
enter into menu setting to switch menu options or parameter values
Long press M: to enter into menu settings (see instructions for Menu 1-6) and press 5 seconds to save and exit.